Promo !
| ISO |
2CE |
|
ISO355 dimension series approx. |
| d |
35 |
mm |
Bore diameter |
| D |
62 |
mm |
Outside diameter |
| T |
21 |
mm |
Total width |
| B |
21 |
mm |
Width of inner ring |
| C |
17 |
mm |
Width of outer ring |
| Cup r (min.) |
1 |
mm |
Chamfer dimension of outer ring (Cup) |
| Cone r (min.) |
1 |
mm |
Chamfer dimension of inner ring (Cone) |
| Cr |
60000 |
N |
Basic dynamic load rating |
| C0r |
65000 |
N |
Basic static load rating |
| Grease |
5600 |
min-1 |
Grease lubrication |
| Oil (Oil-bath) |
8000 |
min-1 |
Oil-bath lubrication |
| a |
14.1 |
mm |
Effective load center |
| da (min.) |
44 |
mm |
Diameter of shaft abutment (min) |
| Db (min.) |
59 |
mm |
Diameter of housing abutment |
| Da (min.) |
55 |
mm |
Diameter of housing abutment |
| Da (max.) |
56 |
mm |
Diameter of housing abutment |
| Sa |
4 |
mm |
Minimum width of space required in housing on large side face |
| Sb |
4 |
mm |
Minimum width of space required in housing on small side face |
| db (max.) |
40 |
mm |
Diameter of shaft abutment |
| ra (max.) |
1 |
mm |
Radius of shaft or housing fillet of inner ring |
| ra (max.) |
1 |
mm |
Radius of shaft or housing fillet of outer ring |
| e |
0.31 |
|
Constant |
| Y0 |
1.1 |
|
Axial load Factors |
| Y1 |
2 |
|
Axial load Factors |
| Mass approx. |
0.267 |
kg |
Mass approx. |
Avis
Il n’y a pas encore d’avis.